| P-43 Lancer | |
|---|---|
| USAAC Republic P-43 Lancer (USAF photo) | |
| Role | Fighter |
| Manufacturer | Republic Aviation Company |
| Designer | Alexander de Seversky Alexander Kartveli |
| First flight | March 1940 |
| Introduction | 1941 |
| Retired | 1944 (China) |
| Primary users | United States Army Air Corps China Royal Australian Air Force |
| Produced | 1940–1941 |
| Number built | 272 |
| Developed from | Seversky P-35 |
The Republic P-43 Lancer was a single-engine, all-metal, low-wing monoplane fighter aircraft built by Republic, first delivered to the United States Army Air Corps in 1940.[1] A proposed development was the P-44 Rocket. While no world-beater as a fighter, the P-43A had a very good high-altitude performance coupled with an effective oxygen system. Fast and well-armed with excellent long-range capabilities, until the arrival of the P-38, the Lancer was the only Allied fighter capable of catching a Japanese Mitsubishi Ki-46 "Dinah" "recon bird" at the speeds and heights at which they flew. In addition, the P-43 flew many long-range, high-altitude photo recon missions until replaced by F-4/F-5 Lightnings (P-38 variants) in both the USAAF and RAAF.
Contents |
The Seversky Aircraft Company, which in 1939 changed its name to Republic, constructed a range of private venture, one-off variants of its P-35 design, featuring different powerplants and enhancements, designated AP-2, AP-7, AP-4 (which flew after the AP-7), AP-9, XP-41. The series included a carrier-based version designated the NF-1 (Naval Fighter 1) that was also built. The most significant of these was the AP-4, which served as the basis for future Seversky/Republic aircraft. It featured fully retractable landing gear, flush riveting, and, most significantly, a Pratt & Whitney R-1830-SC2G engine with a belly-mounted turbo-supercharger, producing 1,200 hp (890 kW) and good high-altitude performance. The turbo-supercharger had been refined by Boeing as part of the development program for the B-17 Flying Fortress, and the improved performance it offered was of great interest to other aircraft manufacturers.[1]
The XP-41 and sole AP-4 were nearly identical, although the AP-4 was initially fitted with a large prop spinner and a tight-fitting engine cowling, as a testbed to evaluate means of improving the aerodynamics of radial-engined fighters, following similar experiments with the first production P-35. The AP-4's big spinner was later removed and a new tight cowling fitted. Unsurprisingly, these measures led to overheating problems. On 22 March 1939, the engine caught fire in flight, the pilot had to bail out, and the AP-4 was lost. Despite the loss of the prototype, the USAAC liked the turbo-supercharged AP-4 demonstrator enough to order 13 more in May 1939, designating them YP-43.[2]
The YP-43 differed from AP-4 in having a "razorback" fuselage with a tall spine extending back from the canopy.[3] The engine air intake was moved from the port wing to under the engine resulting in the distinctive ovoid cowling. The aircraft was powered by an R-1830-35 14-cylinder air-cooled radial engine with a General Electric B-2 turbo-supercharger generating 1,200 hp and driving a three-blade variable-pitch propeller. Armament consisted of two synchronized .50 in (12.7 mm) machine guns in the cowl and a single .30 in (7.62 mm) machine gun in each wing.[1]
The first of 13 YP-43s was delivered in September 1940, the last in April 1941. Early testing revealed a strong tendency to yaw during takeoff and landing rolls, fixed by redesigning the tailwheel. Although the aircraft exceeded the initial USAAC performance requirements, by 1941 it was clearly obsolete, lacking maneuverability, armor, or self-sealing fuel tanks. The USAAC felt the basic P-35/P-43 design had exhausted its reserves for further improvement in performance and shifted its interest to the promising P-47.[4]
Production aircraft identical to the YP-43 prototypes, were designated "Lancer" and were delivered between 16 May and 28 August 1941. Ongoing delays in the P-47 program resulted in USAAC ordering an additional 80 P-43J, with Pratt & Whitney R-2180-1 Twin Hornet engine rated at 1,400 hp (1,000 kW). The engine promised better high-altitude performance, and armament was upgraded with 0.50 in machine guns replacing the 0.30 in in the wings. The USAAC was sufficiently interested to assign the AP-4J variant an official designation P-44 Rocket. Combat reports from Europe indicated that the new type was already obsolete, consequently, the entire order was canceled on 13 September 1940, with no prototypes built.
Alexander Kartveli and his team focused their efforts on the advanced AP-10/XP-47 which eventually became the fabled P-47 Thunderbolt.[1] When the Pratt & Whitney R-2800 engine intended for the new P-47 was not yet available, it was decided to order 54 P-43s to keep the Republic production lines operating. An additional 125 P-43A-1s were ordered for China through the Lend-Lease program, originally intended to equip the Third American Volunteer Group (AVG). These initially differed in the Air Materiel Command specification from earlier P-43s in being armed with two 0.50 in machine guns in each wing and no fuselage guns, and having rudimentary armor and fuel tank protection.[5] This would have required a series of serious engineering changes. Reality intervened: actually, as delivered, the P-43A-1 had the same armament layout as the P-43As: four .50 in machine guns, two in the cowl and two in the wings. Externally, they were identical, and only the serial numbers distinguishes a P-43A from a P-43A-1. Many of these aircraft were fitted with cockpit armor before shipment westward from California in crates; evidence is murky whether the cockpit armor came from Republic or was cobbled together after delivery.[6]
By 1942, a total of 272 P-43 and its variants were built, a remarkable number considering the original intention was to not build any.[5]
The Lend-Lease aircraft were delivered to China through Claire Chennault's American Volunteer Group, the "Flying Tigers". Pilots involved in the ferrying flights commended the P-43 for its good high-altitude performance compared to the Curtiss P-40, good roll rate and a radial engine without a vulnerable liquid cooling system. Apparently, several AVG pilots asked Chennault to keep some P-43s, but the request was denied due to the aircraft's lack of armor or self-sealing fuel tanks. In addition, the turbo-supercharger proved unreliable and the "wet wing" fuel tanks leaked constantly.[7] In June 1942, Robert L. Scott Jr—an AVG pilot—photographed the peaks of Mt. Everest from 44,000 ft (13,000 m), attesting to the strengths of this aircraft. The P-43 performed poorly in combat in the hands of the Chinese Air Force against Japan due to its great vulnerability; it was replaced by other aircraft in early 1944. Rudimentary protection added on the P-43A-1 was insufficient. In addition, the P-43's R-1830 engines were in high demand for the Douglas C-47 transport, effectively grounding the surviving aircraft.
The USAAC considered the P-43 and its variants obsolete from the start and used them only for training purposes. In fall 1942, all surviving USAAC P-43s were redesignated RP-43 indicating they were unfit for combat. Most of the aircraft that were not sent to China were modified for photo-reconnaissance duties and used for training. Eight P-43s (four P-43a-1s and four P-43Ds) were loaned to the Royal Australian Air Force in 1942 and served with No. 1 Photo Reconnaissance Unit, based at Coomlie, Northern Territory. The RAAF flew many long range, high-altitude photo reconnaissance missions before the six survivors were returned to the USAAC in 1943.[8]
General characteristics
Performance
Armament
|
||||||||||||||
|
||||||||||||||
|
||||||||||||||